64 11 475 Removing And Installing Complete Cooler Box

Necessary Preliminary Tasks: 

• Remove cover (optional extra: cooler box). Refer to 52 25 030 REMOVING AND INSTALLING COMPLETE ARMREST FOR REAR SEAT BACKREST .

Disconnect plug connection (1).

Unscrew nuts (2).

Remove compensating shims (3).

Installation: 

Align cooler box centrally.

Make sure compensating shims (3) are in correct installation position.

Tighten nuts (2) to specified torque: tightening torque, refer to 64 11 5AZ in HEATING AND AIR CONDITIONING - TIGHTENING TORQUES .

Release screws (1).

Release nuts (2) and remove holder (3).

Gently pull floor inlay (4) towards rear.

Pull out cooler box (5) in direction of arrow.