64 11 386 Removing And Installing Left Operating Unit For Rear A/C System

NOTE:

Special Tools Required:

Lever out trim (1) with special tool 00 9 340.

Fig 1: Removing Trim Using Wedge

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove operating unit for rear A/C system (2) in direction of arrow.

Unlock plug connection (1) and disconnect.

Fig 2: Identifying Operating Unit Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure guides of operating unit (2) are correctly seated in roofliner.

Fig 3: Locating Guides Of Operating Unit

Courtesy of BMW OF NORTH AMERICA, INC.