51 22 302 Removing And Installing/Replacing Chrome Strip For Window Cavity Cover Strip, Rear Left Or Right
NOTE:
For Special Tool identification, see MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
Special Tools Required:
- 00 9 311
Stick adhesive tape (2) below window cavity cover strip (1) (risk of damage).
Using special tool 00 9 311 (starting at front and proceeding to rear), lever out window cavity cover strip (1).
Installation:
Moisten window cavity cover strip (1) with water.
Window cavity cover strip (1) must be flush at front and rear with door edge.
Installation:
Seal (1) must be correctly fitted in chrome strip (2).
Initialize power window. Refer to 67 62... NOTES ON INITIALIZING POWER WINDOW .