51 16 188 Replacing Base For Center Console On Storage Tray

Necessary Preliminary Tasks:

IMPORTANT: Set down center armrest on a suitable surface.

Release screws (1) on left/right.

Remove trim (2) in direction of arrow.

Fig 1: Removing Trim Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Raise base (2) in direction of arrow and pull off.

Installation:

Make sure base (2) is correctly seated in guides (3).

Fig 2: Aligning Base In Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug housing (1) and feed out cable.

Release screws (2).

Remove center console function carrier (3).

Fig 3: Locating Screws From Center Console Function Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove drinks holder (2) in direction of arrow.

Fig 4: View Of Drinks Holder Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.