51 45... Removing And Installing/Replacing Center Instrument Panel Trim

Remove wood trim on instrument panel on right. Refer to 51 45 366 REMOVING AND INSTALLING/REPLACING WOOD TRIM ON RIGHT .

Release screws (1).

Pull out trim (2) slightly in direction of arrow.

Fig 1: Locating Trim Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug (1) from PDC switch and detach.

Remove trim (2).

Installation: 

Make sure retainers (3) engage correctly in openings (4).

Fig 2: Identifying Plug From PDC Switch

Courtesy of BMW OF NORTH AMERICA, INC.