51 24 050 Removing and installing/replacing lock element (lock cylinder) for rear lid (up to 03/2005)

Necessary preliminary tasks:

Detach cover (1) from lock element (2).

Fig 1: Detaching Cover From Lock Element

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect Bowden cable (3) from element (4).

Fig 2: Disconnecting Bowden Cable From Element

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retainer (5) must be correctly fitted.

Version with manual unlocking:

Release screw (1).

Slide Bowden cable with holder (2) to one side.

Release screw (1).

Fig 3: Removing Lock Element

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew lock element (2) in direction of arrow from rear lid (3).

Installation:

Perform function check with rear lid open.

Installation:

Following parts of lock element (5) must not be damaged or missing:

Fig 4: Identifying Lock Element Components

Courtesy of BMW OF NORTH AMERICA, INC.