Adjustment of Soft Close Automatic:

• Check fulcrum pads on lower section of rear lid lock for damage and replace if necessary.
• Close rear lid.
• Check height of rear lid to side panels.

For ideal adjustment, refer to Height Adjustment Of Trunk Lid: , adjust if necessary.

Fig 1: Identifying Adjustment Of Soft Close Automatic

Courtesy of BMW OF NORTH AMERICA, INC.

Open rear lid.

Screw in rubber buffers (1) on left/right completely.

Fig 2: Screwing In Rubber Buffers

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out caps (1) from trim (2).

Fig 3: Removing Caps From Trim

Courtesy of BMW OF NORTH AMERICA, INC.