54 10 Glass tilt sunroof
WARNING: This page is about a different variant/trim than selected.
GLASS TILT SUNROOF TIGHTENING SPECIFICATION
| Application | Type | Thread | Tightening Specification | Measure |
|---|---|---|---|---|
| 1AZ Motor on glass tilt sunroof frame | ||||
| Replace screw | E36 / Z3 Coupe, M Coupe | M5 | 6 Nm | |
| 2AZ Lid on glass tilt sunroof frame | E36 / Z3 Coupe, M Coupe | 3.5 +/- 0.5 Nm | ||
| 3AZ Shoehorn hinge on glass tilt sunroof lid | E36 / Z3 Coupe, M Coupe | 4 +/- 0.5 Nm | ||
| 4AZ Lid bearing on glass tilt sunroof frame | E36 / Z3 Coupe, M Coupe | 3.5 +/- 0.5 Nm | ||
| E63 | Hinge, front | 4.6 Nm | ||
| 5AZ Glass sunroof lid to drive case | E63 | Replace screws | 4.6 Nm | |
| 6AZ Drive case to body | E63 | 8 Nm | ||
| 7AZ Floating roof liner to gate | E63 | 3 Nm |