51 23 110 Removing and installing/replacing left hood/bonnet lock

Unclip coupling (1) from side panel.

Open cover (2).

Lever cable (3) out of coupling (1).

NOTE: The operation "Disconnect cable for hood/bonnet locks" ends here.

Fig 1: Removing Cable Out Of Coupling

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew screws (1).

Feed out hood/bonnet lock (2) with cable (3) in direction of arrow.

Fig 2: Removing Hood/Bonnet Lock With Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage cable (1) from hood/bonnet lock (2).

Fig 3: Disengaging Cable From Hood/Bonnet Lock

Courtesy of BMW OF NORTH AMERICA, INC.