67 61 005 Removing and installing/replacing drive with gear (front) for actuating slide/tilt sunroof
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD protection), refer to 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
.
Necessary preliminary tasks:
- Remove front roofliner trim, refer to 51 44 ... REMOVING AND INSTALLING FRONT ROOFLINER TRIM .
NOTE:
Secure drive with gear for actuating slide/tilt sunroof (3) against falling out.
Unfasten plug connection (1) and disconnect.
Release screws (2), tightening torque 3.5 N.m.
NOTE:
Screws (1) are microencapsulated.
Feed drive with gear for actuating slide/tilt sunroof (3) out of roofliner (4) and remove.
Installation:
Insert gear wheel (1) of drive with gear for actuating slide/tilt sunroof (2) exactly in gear teeth (3).
Installation:
- Initialise slide/tilt sunroof, refer to 54 0 ... NOTES ON PANORAMA GLASS ROOF (INITIALIZATION/NORMALIZATION/LEARNING OF CHARACTERISTIC CURVE) .