LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2004 >> 645Ci 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair Instructions >> Trunk latch, locks >> 51 24 130 Removing and installing/replacing striker for rear lid lock

51 24 130 Removing and installing/replacing striker for rear lid lock

Necessary preliminary tasks: 

Release screws (1).

Remove striker for rear lid lock (2) (lower section of rear lid lock).

Fig 1: Removing Striker For Rear Lid Lock
G03287626Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

  1. Adjust rear lid lock.
IMPORTANT: Striker and rear lid lock must not be greased.