LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2004 >> 645Ci 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair Instructions >> Instrument cluster trim panel >> 51 45 177 Removing and installing/replacing panel for active knee protector on left

51 45 177 Removing and installing/replacing panel for active knee protector on left

WARNING: Read and comply with safety regulations for handling airbag modules and pyrotechnical belt tensioners. Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks: 

Release screws (1) and lower panel for left active knee protection (2).

Installation: 

Replace screws.

Tightening torque, 8 N.m.

Unlock plug connection (3) of panel for left active knee protection (2), disconnect and remove panel for left active knee protection (2).

Fig 1: Removing And Installing/Replacing Panel For Active Knee Protector On Left
G03287743Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Always replace panel for active knee protector on left complete. Do not carry out any repairs on the panel for the left active knee protection.