51 21 180 Removing and installing/replacing cover on outside handle

Necessary preliminary tasks:

2-door Models:

Remove plate (2).

Fig 1: Removing Plate (2-Door Models)

Courtesy of BMW OF NORTH AMERICA, INC.

4-door Models:

Remove plate (2).

Fig 2: Removing Plate (4-Door Models)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Protect bore (1) against scratching (risk of corrosion). Unscrew bolt (2).

Installation:

Press cover (3) slightly towards rear when screwing down (gap).

Fig 3: Identifying Bore

Courtesy of BMW OF NORTH AMERICA, INC.

Remove stop pad (1).

Fig 4: Removing Stop Pad

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screw (1).

Fig 5: Loosening Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Press mounting (2) back, lever out cover (3) at rear and remove in direction of arrow.

Installation:

Following parts of cover on outside handle (5) must not be damaged or missing:

Fig 6: Identifying Parts Of Cover On Outside Handle

Courtesy of BMW OF NORTH AMERICA, INC.