51 47 440 Removing and installing/replacing rear carpet on seat pan

Necessary preliminary tasks: 

• Remove left/right front seat
• Remove handbrake lever
• Remove vehicle centre sensor
• Remove rear left/right side trim
• Remove front inside entrance cover strip

Disconnect connector (1).

Lay cable (2) back.

Feed out cables (3 and 4) through carpet (5).

Remove carpet (5).

Fig 1: Removing And Installing/Replacing Rear Carpet On Seat Pan

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure openings for air duct and attachment points are correctly positioned.

Make sure all cables are in correct position.