51 11 ... Removing and installing/replacing front fog lamp trim (M aerodynamic kit)

NOTE:

Special Tools Required:

Partially fit special tool 64 1 020 as illustrated.

Lever out fog lamp trim (2) at retaining lugs (1).

Feed fog lamp trim (2) out of outer bracket (3) and remove from bumper trim (4).

Fig 1: Locating Retaining Lugs For Fog Lamp Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) and outer guide (2) of fog lamp trim (3) must not be damaged.

Fig 2: View Of Retaining Lugs Of Fog Lamp Trim

Courtesy of BMW OF NORTH AMERICA, INC.