LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2004 >> 545i Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair >> Rear Door Locks, Handles, Fittings >> 51 22 ... Removing and installing/replacing side impact protection in left or right rear door

51 22 ... Removing and installing/replacing side impact protection in left or right rear door

Necessary Preliminary Tasks: 

Security version: 

Side impact protection cannot be removed.

Version With Crashpad Up To 03/2004: 

Release screw (1) and feed crashpad (2) in direction of arrow out of inner door plate (3).

Installation: 

Plug-in nut (4) on crashpad (2) must not be damaged.

Fig 1: View Of Plug-In Nut On Crashpad
G03270899Courtesy of BMW OF NORTH AMERICA, INC.

Version With Door Reinforcement Up To 04/2004: 

Remove side impact protection:

Release screw (1).

Slacken screw (2) with open-end wrench (3) (do not release fully).

Installation: 

Tightening torque, refer to 51 22 9AZ in BODY EQUIPMENT - TIGHTENING TORQUES - 545I (4.4L) E60 .

Feed out side impact protection (4) downwards and remove.

Fig 2: Locating Retaining Screw In Door Reinforcement
G03270900Courtesy of BMW OF NORTH AMERICA, INC.