51 32 170 Removing and installing/replacing door window glass, front left or right
Necessary Preliminary Tasks:
Open door window to 205 mm.
Remove sound insulation in front door. Refer to 51 48 060 REMOVING AND INSTALLING/REPLACING SOUND INSULATION IN LEFT OR RIGHT FRONT DOOR .
Door window glass (1) must be opened to dimension (A).
A = approx. 205 mm.
Release screws (2).
Installation:
Rubber (3) must be correctly fitted.
Tightening torque, refer to 51 32 2AZ in BODY EQUIPMENT - TIGHTENING TORQUES - 545I (4.4L) E60 .
Turn door window glass and lift out towards rear/top.
Installation:
Adjust door window glass. Refer to 51 32 154 ADJUSTING LEFT OR RIGHT FRONT DOOR WINDOW .
NOTE:
Carry out function check (one-touch function, anti-trapping protection and, if necessary, comfort function).