51 21 330 Removing and installing/replacing window cavity cover strip on inner front door

Necessary Preliminary Tasks: 

• Remove front door trim. Refer to 51 41 000 REMOVING AND INSTALLING LEFT OR RIGHT FRONT DOOR TRIM PANEL .

Lever out cover (1) at rear slightly.

Start at rear with removal of window cavity cover strip (2).

Cut window cavity cover strip (1) to length on B-pillar side to 680 mm.

Pull off window cavity cover strip (1) towards top.

Replacement with Security version: 

Installation: 

If necessary, replace faulty clips (3).

Insert window cavity cover strip (1) below cover (2).

Installation: 

Coat window cavity cover strip (1) with water before fitting.

Start with installation at front.