35 40 001 Removing and installing/replacing accelerator pedal module

Unscrew screw.

Pull accelerator pedal module upwards out of fixture.

Fig 1: Pulling Accelerator Pedal Module Upwards Out Of Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Tightening torque, see 35 40 1AZ in PEDALS - TIGHTENING TORQUES .

Pull off plug (1).

Remove accelerator pedal module.

Fig 2: Pulling Off Plug

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Accelerator pedal module can only be replaced completely with adapter plate.