61 67 083 Removing and installing/replacing left or right high-pressure nozzle of headlight cleaning system

Necessary preliminary tasks:

To prevent excessive escape of washer fluid, seal off end of high-pressure line with special tool 13 3 010 .

Fig 1: Identifying Seal Off End Of High-Pressure Line With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock high-pressure line (1) and detach from high-pressure nozzle (2).

Release screws (3).

Remove high-pressure nozzle (2).

Installation:

New spray nozzles are already preset.

Carry out a function test before fitting bumper trim.

Fig 2: Removing High-Pressure Line And High-Pressure Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.