12 31 Alternator with Drive and Mounting Parts
ALTERNATOR WITH DRIVE AND MOUNTING PARTS SPECIFICATION
| Application | Type | Thread | Tightening specification |
|---|---|---|---|
| 1AZ Wires to alternator | |||
| Terminal D+ | M10/M20 | 5 N.m | |
| All/others | M6 | 7 N.m | |
| Terminal B+ | S38/B38 | 8 N.m | |
| All/others | M8 | 13 N.m | |
| 2AZ Pulley | All | 45 N.m | |
| 3AZ Pulley (ribbed drive belt) | Alternator with cooling jacket | 80 N.m | |
| all others | 70 N.m | ||
| N42, N46 Valeo | 75 N.m | ||
| N42, N46 Bosch | 65 N.m | ||
| 4AZ Rear holder | All | 3.5 N.m | |
| 5AZ Fillister head screw for wire holder | All | 3.5 N.m | |
| 6AZ Alternator on bearing block | M40/M42/M43/M44 | 43 N.m | |
| 7AZ Alternator to crankcase | N42, N46, N62 | M8 | 21 N.m |
| 8AZ Belt pulley (ribbed V-belt) with freewheel (Ina) fitted to Bosch and Valeo alternators | N42 | 80 N.m |