51 12 810 Removing and installing / replacing deformation element on bumper carrier on left or right

Necessary preliminary tasks:

Release screws (1). Remove locator (2) straight towards rear.

Fig 1: Removing Locator Toward Rear

Courtesy of BMW OF NORTH AMERICA, INC.

Installation

Tightening torque: see 3AZ in 51 12 REAR BUMPER .

Installation

Foam seal (1) on locator (2) must not be damaged.

Fig 2: Removing Locator Toward Rear

Courtesy of BMW OF NORTH AMERICA, INC.