51 16 045 Removing and installing/replacing retaining ring on left or right door mirror (M5)

Necessary preliminary tasks: 

• Remove MIRROR GLASS 

Release screws (1).

Release retaining ring (2) at catches (3) and remove towards rear.

Tightening torque: see 14AZ in 51 16 MIRRORS, FINISHERS, ASHTRAYS, CONSOLES

Fig 1: Identifying Screws, Retaining Ring, And Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Catches (1) on door mirror (2) must not be damaged.

Fig 2: Identifying Door Mirror And Catches

Courtesy of BMW OF NORTH AMERICA, INC.