51 11... Removing and installing/replacing cover for headlight washer unit on left

Version without headlight washer unit (SRA): 

• With bumper trim fitted, unclip cover (1) with special tool 00 9 341 .
• With bumper trim removed, unclip cover (1) from inside.

Press catch together.

Feed cover (1) out of carrier (2)..

Version with headlight washer unit: 

Carefully open out cover (1).

Press catches (2) together and feed out cover (1) in outward direction.

Removing lever for headlight washer unit cover: 

Remove BUMPER TRIM .

Release spring (1) and remove lever (2).