Removal & Installation

Remove screws (1). Remove front panel center section (2) in direction of arrow and place aside. See Fig 1 . Remove remaining screws (1). Remove radiator cover (2) in direction of arrow. See Fig 2 . To install, reverse removal procedure.

Fig 1: Removing Radiator Cover (6-Cylinder Shown; V8 Is Similar - 1 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Removing Radiator Cover (6-Cylinder Shown; V8 Is Similar - 2 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.