LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2004 >> 330Ci 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair >> Front Bumper >> 51 11... Checking shock absorber (impact absorber) for front bumper >> Necessary preliminary tasks:

Necessary preliminary tasks:

NOTE: The impact absorber shown in the illustration is for viewing purposes only and may differ from the removed impact absorber.

Check dimension (A).

Dimension (A) is measured from center of pin boss up to mounting face for body (without gasket).

Replace impact absorber (1) if measurement drops below dimension (A).

Fig 1: Replacing Impact Absorber
G03124091Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals