51 71 080 Removing and installing/replacing partition wall for equipment compartment on left

Release screw (1).

Fig 1: Detaching Vacuum Hose From Partition Wall

Courtesy of BMW OF NORTH AMERICA, INC.

Open hose clip (2).

Detach rubber seal (3).

Detach vacuum hose (4) from partition wall.

Release screw (2).

Remove partition wall (1).

Fig 2: Removing Partition Wall

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install lugs (1) of partition wall on rail (2).

Fig 3: Installing Lugs Of Partition Wall On Rail

Courtesy of BMW OF NORTH AMERICA, INC.