54 12 015 Replacing left or right rubber gaiters for glass slide/tilt sunroof

Removing and installing glass slide/tilt sunroof cover, refer to 54 12 115 REMOVING AND INSTALLING GLASS SLIDING/TILTING SUNROOF LID 

Move mechanism into lift position.

Unscrew bolt (1). Turn rubber gaiter (2) inwards and slide support (3) for rubber gaiter backwards.

Fig 1: Unscrewing Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Slide support (1) for rubber gaiter out of guide (2) and pull forwards to remove.

Fig 2: Removing Support For Rubber Gaiter

Courtesy of BMW OF NORTH AMERICA, INC.

Only replace:

Pull rubber gaiter (1) out of support (2) (if necessary, fold over the crimped area).

Fig 3: Removing Rubber Gaiter

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Check function of contact pressure roller (3).

Check function.