11 12 Cylinder Head with Valve Seat Cover M54 B22
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD WITH VALVE SEAT COVER M54 B22 SPECIFICATIONS
| Valve seat angle | ° | 45 |
| Correction angle: outer | ° | 15 |
| Correction angle: inner | ° | 60 |
| Valve seat width: Inlet | mm | 1.65 +/- 0.25 |
| Valve seat width: Exhaust | mm | 1.65 +/- 0.25 |
| Valve seat bore diameter | ||
| Valve seat surface: Outside dia. Inlet | mm | 29.4 |
| Valve seat surface: Outside dia. Exhaust | mm | 26.5 |