11 12 Cylinder Head with Cover M54
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD WITH COVER M54 SPECIFICATIONS
| Cylinder head height: Original dimension | mm | 140.0 |
| Machining limit, refer to 11 12 719 RESURFACING CYLINDER HEAD SEALING SURFACE (M52 / M52TU / M54 / M56) . | mm | 139.7 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of valve guide (installed) | ||
| Standard | mm | 6.0 H7 |
| Size 1 | mm | 6.1 H7 |
| Size 2 | mm | 6.2 H7 |
| Max. permissible tilt clearance (between valve and valve guide) | mm | 0.5 |
| Bearing of camshaft | ||
| Pilot bearing (1) width | mm | 20 d8 |