11 21 Crankshaft and Bearings M54
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT AND BEARINGS M54 SPECIFICATIONS
| Ground sizes of main bearing journals | ||
| Standard yellow | mm | 59.984-59.990 |
| Standard green | mm | 59.977-59.983 |
| Standard white | mm | 59.971-59.976 |
| Undersize 1 (U 0.25) yellow | mm | 59.734-59.740 |
| Undersize 1 (U 0.25) green | mm | 59.727-59.733 |
| Undersize 1 (U 0.25) white | mm | 59.721-59.726 |
| Undersize 2 (U 0.50) yellow | mm | 59.484-59.490 |
| Undersize 2 (U 0.50) green | mm | 59.477-59.483 |
| Undersize 2 (U 0.50) white | mm | 59.471-59.476 |
| Crankshaft bearing clearance, radial | mm | 0.020-0.058 |
CRANKSHAFT AND BEARINGS M54 SPECIFICATIONS
| Grinding stages, crankshaft guide bearing | ||
| Standard | mm | 25.0 F8 |
| Size 1 | mm | 25.2 F8 |
| Size 2 | mm | 25.4 F8 |
| Crankshaft axial play | mm | 0.080-0.163 |
| Ground sizes of conrod bearing journals | ||
| Standard | mm | 45.00-0.009-0.025 |
| Size 1 | mm | 44.75-0.009-0.025 |
| Size 2 | mm | 44.50-0.009-0.025 |
| Radial conrod bearing play | mm | 0.020-0.055 |