54 13 050 Replacing seal for slide/tilt sunroof lid at rear

WARNING: This page is about a different variant/trim than selected.

Necessary Preliminary Tasks:

NOTE: Follow repair instructions for bonded seals on glass slide/tilt sunroof. Refer to 54 0 ... REPAIR INSTRUCTIONS FOR BONDED SEALS .

Detach seal (1) from slide/tilt sunroof lid.

Fig 1: Detaching Seal From Slide/Tilt Sunroof Lid

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clean bonding surface with adhesive remover.

Press seal without stretching (squashing).

IMPORTANT: Do not touch bonding surface. Surface temperature 20° C. Incorrect bonding of the seal will result in leakage.