52 26 390 Removing and installing/replacing rear head restraints (through-loading system)

WARNING: This page is about a different variant/trim than selected.

Move head restraint up as far as possible.

Forcefully pull out head restraint or detach by hitting firmly on one side from below.

Fig 1: Aligning Head Restraint Upwards

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out guide rods by twisting them back and forth.

CAUTION: Do not damage rear window.

Fig 2: Twisting Out Guide Rods

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Notches (1) on guide rods must point in direction of catch spring (2).

Fig 3: Aligning Notches On Guide Rods

Courtesy of BMW OF NORTH AMERICA, INC.