51 13 065 Removing and installing or replacing finisher on left or right headlight housing

WARNING: This page is about a different variant/trim than selected.

Open hood.

Unclip clip (2) on trim (1) on inside.

Press trim (1) downwards out of holder.

Feed trim (1) out of hook (3) and remove.

Fig 1: Locating Clip On Inside Of Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Mount (2) and hooks (3) and (4) of trim (1) must not be damaged.

Seal (5) must be correctly seated.

Fig 2: Identifying Seal On Trim

Courtesy of BMW OF NORTH AMERICA, INC.