13 64 541 Replacing all fuel injectors

WARNING: This page is about a different variant/trim than selected.

Necessary Preliminary Tasks:

Switch off ignition.
Remove complete injection pipe. Refer to 13 53 240 REPLACING COMPLETE INJECTION PIPE (M54) .

Fig 1: Removing Fuel Injectors From Injection Pipe

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip retainers (1).

Withdraw fuel injectors (2) from injection pipe.

Replace fuel injectors.

Fig 2: Identifying Sealing Ring On Fuel Injector

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Coat sealing rings with anti-friction rubber coating (e.g. petroleum jelly).