Removal & Installation
WARNING: This page does not describe the selected car, but rather 92 other vehicles, including the 2002 BMW Z3, 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW Z3, and 2001 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Apply pedal prop and depress brake pedal slightly. This prevents brake fluid from flowing out of expansion tank and into brake system when brake lines are opened.
- Suck the brake fluid out of the expansion tank. Use a suction device used exclusively for drawing off brake fluid.
- Unfasten brake hose from brake caliper.
- Bend new pipe as required using bending tool 34 5 100. Removed pipe can be used as template.
- If replacing front brake pipe, move wheels into straight-ahead position. Install new pipe and tighten to specification. See TORQUE SPECIFICATIONS .
- Remove pedal prop and bleed brake system. See BLEEDING BRAKE SYSTEM .
NOTE:
Ensure that square head screw on brake hose does not rotate in metal bracket. If necessary, brace the brake hose with mold grips.
NOTE:
Brake pipes are only supplied straight, in correct length and fitted with connecting nipples.
CAUTION:
Never twist brake pipe when installing and avoid all contact with parts attached rigidly to the body.