67 61 515 Replacing drive with gear (front) for actuating slide/tilt sunroof (panorama glass sunroof)

Necessary preliminary tasks:

NOTE: Secure drive with gear for actuating slide/tilt sunroof (2) against falling out.

Release screws (1). Tightening torque, refer to 54 13 1AZ in SLIDE/TILT ROOF AND CONVERTIBLE TOP - TIGHTENING TORQUES - X5 .

Lower drive with gear for actuating slide/tilt sunroof (2).

NOTE: Screws (1) are micro-encapsulated.

Unlock plug connection (3), disconnect and remove drive with gear for actuating slide/tilt sunroof (2).

Fig 1: Removing Slide/Tilt Sunroof (Panorama Glass Sunroof) Drive

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert gear wheel (1) of drive with gear for actuating slide/tilt sunroof (2) exactly in gear teeth (3).

Fig 2: Inserting Gear Wheel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Initialize slide/tilt sunroof, refer to SUNROOF .