33 00 Rear axle - ride height E53/X5 3.0i/X5 3.0d With flared wheel arch
33 00 REAR AXLE - RIDE HEIGHT E53/X5 3.0i/X5 3.0d WITH FLARED WHEEL ARCH SPECIFICATIONS
| Ride level height in normal position (attach tape measure to bottom middle of rim flange and measure to lower edge of wheel arch) |
||
| Tolerance ride height in - normal position max. 10 mm - Design position max. 2 mm |
||
| Difference ride height in - normal position max. 10 mm - design position 2 mm |
||
| Steel spring | ||
| 17" rim | mm +/- 10 | 690 |
| 18" rim | mm +/- 10 | 701 |
| 19" rim | mm +/- 10 | 712 |
| 20" rim | mm +/- 10 | 723 |
| 1-axle air spring | ||
| 17" rim | mm +/- 10 | 698 |
| 18" rim | mm +/- 10 | 709 |
| 19" rim | mm +/- 10 | 720 |
| 20" rim | mm +/- 10 | 731 |
| 2-axle air spring, not low-slung | ||
| 17" rim | mm +/- 10 | 690 |
| 18" rim | mm +/- 10 | 701 |
| 19" rim | mm +/- 10 | 712 |
| 20" rim | mm +/- 10 | 723 |
| 2-axle air spring, low-slung | ||
| 17" rim | mm +/- 10 | 675 |
| 18" rim | mm +/- 10 | 687 |
| 19" rim | mm +/- 10 | 697 |
| 20" rim | mm +/- 10 | 708 |