11 21 Crankshaft and Bearings M62 B 44
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT AND BEARINGS SPECIFICATION
| Ground sizes of main bearing journals | ||
| Standard yellow | mm | 69.984 +0.006 |
| Standard green | mm | 69.977 +0.006 |
| Standard white | mm | 69.971 +0.005 |
| Stage 1 (U 0.25) yellow | mm | 69.734 +0.006 |
| Stage 1 (U 0.25) green | mm | 69.727 +0.006 |
| Stage 1 (U 0.25) white | mm | 69.721 +0.005 |
| Stage 2 (U 0.50) yellow | mm | 69.484 +0.006 |
| Stage 2 (U 0.50) green | mm | 69.477 +0.006 |
| Stage 2 (U 0.50) white | mm | 69.471 +0.005 |
| Undersize 3 (U 0.75 mm) yellow | mm | 69.234 +0.006 |
| Undersize 3 (U 0.75) green | mm | 69.227 +0.006 |
| Undersize 3 (U 0.75) white | mm | 69.221 +0.005 |
| Radial crankshaft bearing play | mm | 0.020-0.050 |
CRANKSHAFT AND BEARINGS SPECIFICATION
| Grinding stages, crankshaft guide bearing | ||
| Standard | mm | 32.0 F8 |
| Size 1 | mm | 32.2 F8 |
| Size 2 | mm | 32.4 F8 |
| Size 3 | mm | 32.6 F8 |
| Crankshaft axial play | mm | 0.085-0.257 |
CRANKSHAFT AND BEARINGS SPECIFICATION
| Ground sizes of conrod bearing journals | ||
| Standard | mm | 48.00 -0.009-0.025 |
| Size 1 | mm | 47.75 -0.009-0.025 |
| Size 2 | mm | 47.50 -0.009-0.025 |
| Size 3 | mm | 47.25 -0.009-0.025 |
| Radial conrod bearing play | mm | 0.016-0.055 |