11 21 571 Replacing grooved ball bearing in crankshaft (M62/S62)

WARNING: This page is about a different variant/trim than selected.

Clutch Removed

Remove grooved ball bearing with special tool 11 2 340 in conjunction with special tool 11 2 016.

Fig 1: Removing Grooved Ball Bearing

Courtesy of BMW OF NORTH AMERICA, INC.

Install new grooved ball bearing and drive firmly home with special tool 11 2 350 in conjunction with special tool 00 5 500.

Fig 2: Installing Grooved Ball Bearing

Courtesy of BMW OF NORTH AMERICA, INC.