1121 Crankshaft And Bearings
WARNING: This page is about a different variant/trim than selected.
1121 Crankshaft And Bearings Tightening Specification
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | |
| Jointing torque | 5.0 N.m | |||
| Torque angle | 45° | |||
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 N.m | |
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 N.m |