11 24 Connecting Rods With Bearings
WARNING: This page is about a different variant/trim than selected.
11 24 Connecting Rods And Bearings Tightening Specification
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | M10/M30 | Replace, wash and oil screws | 55 N.m | |
| M20 / M21 / M40 / M41 / M42 / M43 / M43TU / M44 / M47 / M47TU / M50 / M51 / M52 / M52TU / M54 / M56 / M57 / M57TU / S52 / S50 US / M70 / S70 / M73 / N40 / N42 / N45 / N46 / N62 / N73 / N62S N62TU | Replace, wash and oil screws | |||
| Application torque | 5 N.m | |||
| Jointing torque | 20 N.m | |||
| Torque angle | 70° | |||
| M60 / M62 | Replace, wash and oil screws | |||
| Application torque | 5 N.m | |||
| Jointing torque | 20 N.m | |||
| Torque angle | 80° | |||
| M67 | Replace screws, do not wash off screw coating | |||
| Application torque | 5 N.m | |||
| Jointing torque | 20 N.m | |||
| Torque angle | 85° |