00 00 M14 and M 14x1.5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page is about a different variant/trim than selected.
00 00 M14 AND M 14X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 | Surface colour / (surface coating) | |||
| M14 thread | yellow (ZN) | M14 8.8 | 130 N.m | |
| silver (ZNS) | M14 8.8 | 104 N.m | ||
| yellow (ZN) | M14 10.9 | 180 N.m | ||
| silver (ZNS) | M14 10.9 | 155 N.m | ||
| yellow (ZN) | M14 12.9 | 220 N.m | ||
| silver (ZNS) | M14 12.9 | 170 N.m | ||
| M14x1.5 thread | yellow (ZN) | M14x1.5 8.8 | 143 N.m | |
| silver (ZNS) | M14x1.5 8.8 | 110 N.m | ||
| yellow (ZN) | M14x1.5 10.9 | 200 N.m | ||
| silver (ZNS) | M14x1.5 10.9 | 165 N.m | ||
| yellow (ZN) | M14x1.5 12.9 | 240 N.m | ||
| silver (ZNS) | M14x1.5 12.9 | 180 N.m |