11 14 080 Removing and installing timing case cover, top left (M62 VANOS from 9/98): Notes
WARNING: This page is about a different variant/trim than selected.
Remove left cylinder head cover. These tasks are described in the work step Removing and installing/sealing both cylinder head covers,
refer to 11 12 004 REMOVING AND INSTALLING/SEALING BOTH CYLINDER HEAD COVERS (M62) .
Remove fan clutch with impeller,
refer to 11 52 020 REMOVING AND INSTALLING OR REPLACING FAN COUPLING (M62) .
Remove solenoid valve of camshaft adjustment unit, left,
Disconnect plug connection to check valve.
Detach secondary-air line on timing case cover, top left and right.
Detach secondary-air line on bracket and remove.