52 17 202 Removing and installing/replacing bottom rear panel on front seat backrest (luxury seat)

Headrest must be moved as far forwards as possible.

Remove clips (1) with side cutting pliers.

Unclip rear panel (2) first at side towards rear, then lift out at rear.

Fig 1: Uncliping Rear Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) and springs (2) must be correctly seated in rear panel mounts and must not be bent.

If necessary, replace defective clips/springs.

Fig 2: Installing Rear Panel Clips And Springs

Courtesy of BMW OF NORTH AMERICA, INC.