67 16 010 Removing and installing/replacing left headlight vertical aim adjuster

Necessary preliminary tasks:

M62 only:

Release screws (1) and remove equipment carrier (2).

Fig 1: Releasing Equipment Carrier Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Up to 10/2003:

Subsequent work is described in:

From 10/2003:

Release screws (1) and remove cover (2) in direction of arrow.

Fig 2: Releasing Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure seal of cover (2) is correctly seated.

Disconnect plug connection (1).

Fig 3: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (3).

Feed headlight vertical aim adjuster (2) with ball head (4) in direction of arrow out of associated fixture and pull out.

Installation:

Make sure ball head (4) is correctly seated in associated fixture.

All:

Installation: