63 99 002 Replacing halogen bulb for high-beam headlight on left
WARNING:
Follow instructions for handling light bulbs (exterior lights).
N62 only:
Release screws (1).
NOTE:
Make sure cover caps (3) and (4) are firmly seated.
Lay equipment carrier (2) to one side.
Up to 10/2003:
Unfasten plug connection (1) and disconnect.
Turn bulb holder (2) approx. 45° in direction of arrow and remove.
Remove bulb.
From 10/2003:
Press catch (1).
Fold back cover (2) and remove.
Installation:
Make sure seal of cover (2) is correctly seated.
Disconnect plug connection (1).
Press locking clip (2) and expand.
Remove bulb (3).
Installation:
Note type of bulb, refer to 63 12 HEADLIGHTS, HEADLIGHT ASSEMBLY E53 .