Body Equipment - Repair Instructions - X5 (4.6L)

Attach adhesive tape (1) below window cavity cover strip (2) (risk of damage).

Using special tool 009311 (beginning at front proceeding to rear), lever out window cavity cover strip (1).

Fig 1: Removing Window Cavity Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Coat window cavity cover strip (1) with water before fitting.

Window cavity cover strip (1) must be flush at front and rear with door edge.

Installation: 

Clips (1) must not be damaged.

Fig 2: Use Care Not To Damage Window Cavity Cover Strip Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Retainers (1) of window cavity cover strip (2) must not be damaged.

Fig 3: Use Care Not To Damage Window Cavity Cover Strip Retainers

Courtesy of BMW OF NORTH AMERICA, INC.