66 20 518 Removing and installing/replacing a front ultrasonic transducer

Version Up To 10/2003:

In bumper, center:

Lever out ultrasonic transducer (1) including holder.

In bumper, side:

Unclip side cover (2).

Fig 1: Levering Out Ultrasonic Transducer Including Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Unclip ultrasonic transducer (2) and pull out of holder.

Fig 2: Unclipping Ultrasonic Transducer

Courtesy of BMW OF NORTH AMERICA, INC.

Build Date From 10/2003:

Necessary Preliminary Tasks:

Unlock catches (1) in direction of arrow and pull ultrasonic transducer (2) out of holder (3).

Fig 3: Removing Ultrasonic Transducer

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining hooks (1) of ultrasonic transducer (2) must engage exactly in mountings (3).

Fig 4: View Of Retaining Hooks Of Ultrasonic Transducer

Courtesy of BMW OF NORTH AMERICA, INC.