51 46 000 Removing and installing/replacing trim for oddments tray (back shelf)

Necessary Preliminary Tasks:

Remove both panels for rear roof pillar (C-pillar finishers). Refer to 51 43 251 REMOVING AND INSTALLING OR REPLACING TRIM FROM REAR LEFT OR RIGHT ROOF PILLAR .
Release all seat belts at rear bottom.

Version without through-loading system:

Remove rear seat backrest. Refer to 52 24 010 REMOVING AND INSTALLING/REPLACING BACKREST FOR REAR SEAT (NORMAL) .

Version With Through-Loading System:

Remove both rest side sections on rear seat backrest. Refer to 52 26 008 REMOVING AND INSTALLING/REPLACING LEFT/RIGHT SIDES OF BACKREST ON REAR SEAT BACKREST .

Version with rear window roller blind only:

If necessary, release screws and nuts in luggage compartment.

Installation:

Tightening torque, (6 N.m).

Fig 1: Releasing Screws And Nuts In Luggage Compartment

Courtesy of BMW OF NORTH AMERICA, INC.

Version with rear window roller blind only:

If necessary, disconnect plug connection (1).

Fig 2: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock catches (1) with feeler gauge and pull out both trim grills (2) in direction of arrow.

Fig 3: Identifying Trim Grills

Courtesy of BMW OF NORTH AMERICA, INC.

Version without through-loading system:

Release screws and remove mounting (1) for head restraint center. Lever out belt finisher strips (2) and feed out with strap.

Replacement only:

Lever out trims (3) for head restraints and remove.

Release expansion rivets (4) and pull out rear shelf towards front.

Fig 4: Releasing Expansion Rivets And Pulling Out Rear Shelf Towards Front

Courtesy of BMW OF NORTH AMERICA, INC.

Version with through-loading system:

Release expansion rivets (1) and lever out trim.

Fig 5: Releasing Expansion Rivets And Levering Out Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Version with through-loading system:

Lever out belt finisher strips (1) and feed out with strap.

Only replace:

Lever out trims (2) for head restraints and remove.

Remove parcel shelf towards front.

Fig 6: Removing Parcel Shelf Towards Front

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Push pins (1) of rear shelf into guides (2).

Fig 7: Pushing Pins Of Rear Shelf Into Guides

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The work step "Removing trim for oddments tray (back shelf)" ends here.

If necessary, remove or replace rear window roller blind:

If necessary, expose cable (1).

Fig 8: Identifying Cable

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, release nuts and remove Velcro-type fasteners.

Installation:

Tightening torque, (3 N.m).

Fig 9: Removing Velcro-Type Fasteners

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, release toothed disks and lever out trims (1) on left/right. Feed out rear window roller blind (2) and remove.

Installation:

Check function.

Fig 10: Feeding Out Rear Window Roller Blind

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The work step "Removing or replacing rear window roller blind" ends here.

Replacement only:

Remove speaker finishers (1).

Lift out catches (3) and remove both trim grills (2).

Remove foam support from back shelf.

Fig 11: Removing Speakers

Courtesy of BMW OF NORTH AMERICA, INC.